The Quattro integrates 4 functions within one superb Cyrus die-cast alloy chassis. You could begin your Cyrus system by specifying a Quattro with one of our auto start power amps and you have a superb Cyrus quality CD system, just by adding speakers you could even hide the power amp away.
If you had also liked your Quattro to offer the latest RDS FM radio then you were able to specify the plug-in radio card and have full remote control CD and radio from your Quattro. Your Quattro could have even provide top quality music throughout your home via a further add-in card that could provide a state-of-the-art multiroom system.
Our radio remote control system even removed the need for ugly control panels in distant rooms by employing the latest digital control technology.
Technical Information
Electrical
CD Transport – Integral Loader Mechanism with fully isolated disc clamp
Disc Compatibility – CD, CD-R (closed), CD-RW (closed)
Inputs – Aux, Tape
Analogue Output – Pre-amp, Headphone, CD direct, Tape, Multi-room exp. 3
Digital Outputs – CD digital
Remote Control – Full function remote control
Optional internal upgrades – FM stereo RDS tuner module, 3 Zone multi-room module
Communications – MC-BUS System
Specifications – Quattro CD/pre-amplifier
Input sensitivity (Aux/Tape) – 200mV
Output voltage (pre-out) – 242mV
Output voltage (CD direct) – 2.0V
Output impedance (pre-out) – 220 Ohms
Output impedance (CD direct) – 100 Ohms
Frequency response – 20Hz-20kHz
Channel Separation – >105dB @ 1kHz, >85dB@20kHzS/n ratio (using silent CD track) – >95dBA
S/n ratio (AUX input) – >99dBA
THD (CD, -10dB) – 0.005%
THD (Aux input) – 0.0025%
Digital output – Co-axial 500mV pk-pk, 75 Ohms
Power Consumption – 10W (5W Standby)
Weight – 3.2 Kg
Dimensions – (H x W x D) 78 x 215 x 360 (mm)
Finish – Black
Specifications – optional FM radio module
Sensitivity, Mono, – 30dB S/N 4dBV
Sensitivity, Stereo – 50dB S/N 34dBV
Pilot Tone Suppression – 80dB
Stereo Separation – >30dB
S/N Ratio (mono) – 75dBA
S/N Ratio (stereo) – 72dBA
THD mono 1kHz @ 50kHz Dev – 0.3%
THD stereo 1kHz @ 50kHz Dev – 0.35%
Station presets – 9
Q Power
Stereo power amplifier rated at 50W/8ohm, 30A pk-pk. Amplifier features signal-sensing auto-start for AV and multi-room remote use. Chain output facility allows bi/tri-amping and for large multi-amp zones. High-speed overload and thermal protection circuits for confidence in all installations
The Cyrus Q-Power is an exceptionally versatile power amplifier with outstanding performance. In an system with a Quattro the Q-Power delivers a full 50W/Ch with a level of performance which cannot be achieved by other single box ‘lifestyle’ systems. With the addition of the Multi-room upgrade to the Quattro, further Q-Power amplifiers may be added to distribute high quality sound around the home at the touch of a button.
Offering outstanding performance, the Q-Power may be used to upgrade a Cyrus system for bi-amplification of loudspeakers. The “Chaining” feature of the Q-Power facilitates biamping or tri-amping a fuller installation.
For the AV enthusiast, the Cyrus Q-Power is the ideal choice to drive the surround loudspeakers in a Home Theatre system. A set of three Q-Powers may be used to provide amplification for all channels where 6 x 50W will meet the requirements of the system.
The quality lightweight die-cast enclosure of Cyrus Q-Power has a myriad of advantages both electrically and mechanically. The integrated heatsink design enhances the thermal efficiency allowing higher performance to size ratio. Additionally, the non-resonant nature of the alloy minimises microphonic effects, while its non-ferrous composition provides an effective shield from external electro-magnetic disturbances. This also eliminates coupling of the power transformer stray magnetic fields to the sensitive audio circuitry.
Technical Information
Electrical
Inputs – RCA phono
Outputs – Loudspeakers, line level chain out
Power Supply – 180VA Toroidal transformer
Switch-on – Auto switch-on sensing with input signal
Specifications
Continuous Power – 50W/CH (both driven into 8 Ohms) 70W/CH (both driven into 4 Ohms)
Distortion – <0.004%, (1kHz into 8 Ohms) <0.01%, (20Hz-20kHz into 8 Ohms)
Frequency Response – -3 dB at 1Hz and 80kHz
Current – 30 Amps peak to peak
Sensitivity – (RCA input) 380mV (for 50W stereo into 8 Ohms)
Input impedance – 10Kohm (RCA)
Output voltage – 380mV (Chain out)
S/N Ratio – 110dBA
Dimensions – (H x W x D) 73 x 215 x 360 (mm)
Weight – 4.6kg
Finish – Black